IKEA Racks Up 250,000 Solar Panels

By the end of last year, IKEA had installed more than 250,000 solar panels on company stores and buildings globally and invested in 126 wind turbines in six countries.According to IKEA's latest Sustainability Report, it produced renewable energy equivalent to a third of its total electricity consumption in 2012. By the end of 2015, IKEA says it will have invested AUD $1.93 billion (at current exchange rates) in renewables. The company has an ultimate goal of being 100% renewable energy powered.IKEA acquired two operational wind farms in Poland last year with a total capacity of 28 megawatts and has committed to buy another 26MW wind farm that will be operational this year. A 90MW wind farm under construction in Sweden will generate electricity equivalent to all the power the company uses for operations in that country.
With regard to electrical appliances sold, IKEA says it has improved their efficiency by 32% on average, compared with those it carried in 2008.Over the coming years, IKEA says will switch its entire lighting range to LED. The company sells 79.5 million light bulbs annually and says if all its customers around the world  replaced just one conventional incandescent light bulb with an LED version, that would save enough energy to power a city of one million people.While Australian phased out conventional incandescent light globes some time ago, many other countries have yet to implement bans.  Just in Australia, the switch will have saved around 30 terawatt hours of electricity and avoided the generation of 28 million tonnes of greenhouse gas emissions by 2020.As of August 31, 2012, the IKEA Group had operations in 44 countries and a total of 298 stores in 26 countries.139,000 people are employed by the company.A top state utility regulator who opposed plans for an Ohio solar farm and openly questioned global warming maintained ties with an influential conservative group that supports repealing states' renewable energy requirements.
Todd Snitchler, chairman of the Public Utilities Commission of Ohio, was a keynote speaker at the American Legislative Exchange Council's task force meeting in April 2011. His state ethics filings show he attended another meeting of the council that December, nearly a year after leaving the Legislature to accept Gov. John Kasich's appointment to the commission.It is unclear what role, if any, Snitchler's continued involvement may have played in a model bill penned by the council, known as the Electricity Freedom Act. The council's board of state legislators approved the legislation in October.

GlacialLight LED Troffer Light with a Patented Mounting Solution

Energy-efficient indoor ceiling lighting for hanging, on-ceiling and in-ceiling mounting -GlacialLight, a division of the Taiwanese technology manufacturer, GlacialTech Inc., has announced the new recessed GL-TL0606 LED Troffer Light with embedded driver, which has now joined the company's popular range of LED lighting products. GL-TL0606 is available with either a 30W or 50W AC-input and has a highly adjustable patented mounting solution.Thanks to its configurable patented mounting solution, GL-TL0606 can be used in a variety of global usage contexts. This LED troffer light can be hung from the ceiling using a wire, mounted on the ceiling, or placed in a t-bar grid. By using the integrated extenders of GL-TL0606, the width of the light fixture can also be extended from 595 x 595mm to 600 x 600mm, which ensures a secure positioning of the troffer light in most common t-bar grid standards.
This environmentally-friendly and power saving Best Custom Motion Sensor Lights, GL-TL0606, can be easily installed for indoor office and retail space applications. As it is only 40mm deep and light-weight (3.3Kg) it can be installed on most ceilings. Typical usages of this LED troffer light include hospitals, airports, offices, supermarkets, stores, and most other commercial, and retail locations.As GL-TL0606 comes with an embedded LED driver, it can be easily connected with a wire to an AC connector without requiring the use of tools or any additional configuration inside the light fixture. Further, replacing the entire troffer China Power Bank Exporters fixture is simpler than just installing LED lamps inside an older fluorescent light fixture. This is due to the fact that the starter has to be removed and the ballast needs to be bypassed by adding an extra wire.
Three color temperature variants of GL-TL0606 are available. All color temperature versions have an input voltage range of 100V to 240V AC and provide illumination with a 110° beam angle.GL-TL0606 brings with it a large improvement in luminous efficacy and luminous flux when compared to T8 or T5 fluorescent fixtures. The luminous efficacy of GL-TL0606 is up to 82lm/W, ca. 150% improvement from T8 fixtures (33lm/W) and ca. 70% improvement from T5 fixtures (48lm/W). The luminous flux of GL-TL0606-CW is 4100lm, considerably higher than that of T8 fixtures (2400lm) and T5 fixtures (3000lm).

Car Repair Prices: Fuel Injection Services, Are They Worth It?

Notice that "It's required" did not make the list. That's because fuel injection services are not required the majority of the time.Depending on the product, injection services clean naturally forming carbon deposits from the fuel injectors and fuel railssome will even clean the fuel tank, and valve carbon deposits.In short, yes. Provided it's a premium product (such as BG), and the service is performed correctly. Fuel injection services can do amazing things. They can improve fuel efficiency, increase horse power, and repair some performance concerns, although these benefits are rare.Whether or not fuel injection services will do all the above "every time" for your car is another story.I have even seen fuel injection services quiet horrendous carbon knocks--a knocking noise from the engine due to excessive carbon build-up coming in contact with internal engine components.Maybe. It really depends on the condition of the vehicle. If the service achieves any of the advertised claims, it may be worth it. In truth, most cars don't need it. The consistent use of quality fuel, and proper vehicle maintenance should be all that is necessary to keep a car running properly.
However, consistent use of cheap gas and poor adherence to an auto maintenance schedule, as well as certain driving styles can significantly increase the accumulation of carbon deposits. Thus the possibility of poor fuel efficiency, decreased horsepower, and performance issues increases--all of which could be helped by injector maintenance.The other factor to consider is the expense. How much fuel savings justifies the cost of the fuel injection service, and how long is the pay off. BG claims that their product will pay for itself in a year's time. However, remember that the condition of the vehicle is a big variable! If the car doesn't need it, there's no benefit.
Not if done correctly.Done incorrectly, anything goes.A technician could conceivably hydro-lock your engine, or blow a hole in the pistonalthough both scenarios are rare.If anything does go wrong, there is usually an underlying problem, which gets exacerbated by the fuel injector auto maintenance.Why doesn't my manufacturer recommend fuel injector cleaning auto maintenance?No manufacturer recommends fuel injector cleaning auto maintenance under normal operating conditions. From a manufacturer's viewpoint: take care of your car right (i.e., as the manufacturer dictates) and you'll be fine.

Diesel Injector Servicing, The Basics

Gradually over time nozzles on the diesel injector, pump and piston will get a build up of carbon and varnish. This will normally happen to engines that don't use diesel fuel additives in every fill up or fuel, or will happen naturally over time when you've driven lots of miles. Also if you drive around town quite a bit the stop-and-go metro driving can create deposits much faster than motorway driving. These build-ups can occur on any internal combustion engine, whether it burns gasoline or diesel. If you have a Diesel engine, then you will at some stage need diesel injector servicing.
Quite often with older high-mileage diesel cars, diesel injector servicing will involve performing a diesel purge or to clean the injectors and injection pump. But this is not just to just dump some liquid into the fuel tank. While that should be done and is often part of a good prevention plan you will sometimes need to clean the components directly. The results from this can be fantastic in terms of power, producing less smoke, easier to start, better acceleration and overall better performance. This process can be used on any diesel that is not common rail-injection.Most car manufacturers will say that diesel injectors should be cleaned every 100,000 miles of driving.To clean your diesel injector you need some common tools and a few unique items. The easiest way to clean the diesel injectors is to pick up a standard diesel fuel purge kit. This will usually come with 2 bottles of cleaning solution, designed to put pressure on the insides of the diesel injectors and force the contaminants out. In addition to this you need 2 fuel hoses and a large bottle to accommodate the fuel hoses. You will also need a ratchet set, a screwdriver and some pliers. For simpler injector cleaning you can use a bottled injector cleaner which is added directly into the system.
Diesel injector servicing has a few things you need to watch out for. One of the most important steps is finding the supply and return valves for the fuel. Supply valves will bring new fuel into injectors, while return valves process used fuel. The supply line will usually have a small filter attached on it. You must disconnect the original hoses and then attach the new hoses that are connected to the bottle. In a way you will be creating an external fuel injector line. Then you need to dump the cleaner into the bottle. Fire up the engine and rev it to various speeds. Changing your engine speed is a must to ensure that the different areas of the injectors are cleaned properly. Once done you must replace the original parts.

Things To Know About A Windows Cleaner

Windows cleaner is an effective tool that helps to protect your privacy, cleans up the clutter in your computer by removing garbage files.As you use your computer, all the activities it carries out are logged in. All software programs, including Windows, keep a track of the websites you have visited - the documents you have used, and all similar activities you have performed - and store them. A Windows cleaner is a tool that removes all the document histories you have created while working on your computer, offline as well as online, including cleaning the cookies and temporary Internet files. It also cleans up all the places where Windows stores all your activities, including in the document menu and the Recycle bin. Thus it is an effective tool to enhance PC performance. With a Windows cleaner, you will never have to face the problem of your computer running slow.
A Windows cleaner helps protect your privacy by cleaning up your system. As everything you do on your computer is logged in, this is a matter of invasion of your privacy, as any one can see what you have done, and the sites you have visited. In addition, the storing of all the activities takes up a lot of disk space, and this valuable space needs to be recovered to enhance PC performance.Cleaning up your tracks by removing all the extra unwanted files, such as the application, temporary files, cleaning up the history of your activities, recovering valuable disk space, and cleaning your browser's cache of cookies, along with your Windows tracks, the Windows cleaner is one great way to keep your computer running faster and free of error.
Some registry cleaners can also detect viruses and spyware as many of such malicious intruders are either inserted into or modify the registry. Some of these packages have options to tweak your computer even more by letting you modify the startup sequences of the operating system search for broken links delete temporary files and search for duplicate files on the hard drive.How The Registry Gets Clogged. It is during the process of downloading programs or files from the Internet that the registry gets filled with redundant information such as ActiveX controls and stuff. Some hardware such as plug and play peripherals also have to be registered in the registry. But when these programs and peripherals are removed the registry entries still remain. This takes up space on the drives as well as slows the system down.A good registry cleaner such as the windows XP registry cleaner or the free PC registry cleaner can remove this stagnant information from the registry and make the system more efficient and faster.. Getting the right registry cleaner is very critical to your computer speed and performance. If you own a computer, you must have your very own registry cleaners installed. Registry cleaners plays an integral part in our lives.

Know about effective a mma training programme

MMA is defined as Mixed Martial Arts. It is a full contact combat game that authorizes a wide variety of war techniques, from a mixture of usual wrestling, to be used in opposition. An mma training, ufc workout or mma conditioning that make power and conditioning are keys to MMA success .The rules allow the use of grappling methods, both as footing and on the land.Such fights give martial player of different backgrounds to compete. Unlike some sports that have a limited range of activity and skills needed, mma training, ufc workout or mma conditioning education requires a full body routine. Fundamentals begin with muscle structuring and strength ornamental moves. There are a number of workout and equipment that help in muscle building and powering. Free weights are the easiest and most low price instrument for players who pay a good deal of time working at home.
Such fights permit martial artist of diverse surrounding to compete. Not like a few games that have a partial choice of shifts and skills needed, mma training, ufc workout or mma conditioning needed a full body routine. Basics begin with muscle building and power enhancing moves. There are dozens of exercises and machines that support muscle building and powering. Free weights are the easiest and most low cost tool for artists who pay a good deal of time working at home.Sleep is vital along with rest, so that body has chance to repair itself. It's also vital to lose the attitude before you begin mma training, ufc workout or mma conditioning. One of the most chief points is to choose the correct gym.
If you are looking forward to create an effective e-commerce website for your business, then hire Joomla programmer. No wonder, you will receive the highest custom-made web development services and advantages from Joomla. They will cater to your business requirements and wants in the most professional manner. Joomla programmer is capable and a quite affordable programmer, who will save both your energy and time to develop a dynamic website. This is the reason, it is very essential to recruit Joomla developers or programmers to create a beneficial CMS website.So, to emphasize on the quality of your website, you must hire a professional PHP programmer from a reliable web development company and see what he creates for you.A really good combination to try is leg extensions and squats done in this manner. The leg extensions will exhaust the quadriceps, but the muscles of the back and the glutei will be fresh and enable you to then squat and take the quads well beyond their normal failure point.

In-house Manufactured UltraLight Substrate and Filing of One New Patent Application

QSolar Commences Volume Production of Its New, Proprietary, In-house Manufactured UltraLight Substrate and Filing of One New Patent Application.QSolar Commences Volume Production of Its New, Proprietary, In-house Manufactured UltraLight Substrate and Filing of One New Patent Application.Calgary, Alberta CANADA, January 08, 2013 /FSC/ - QSolar Limited (QSL - CNSX),("QSolar" or the "Corporation") is pleased to announce that, having completed the development of a new substrate, for use in its QLiteX solar panel manufacturing process, it has now commenced full scale manufacturing in its Shanghai manufacturing facilities integrating and utilizing the new ultra-light substrate. In conjunction with this development, QSolar has filed a new patent application.
The Corporation has commenced manufacturing of the new substrate and shipped its newer version of QLiteX to customers. This development will assist the Corporation in further controlling its product costs, improve quality control, have fully integrated manufacturing of the full production cycle, and have much greater flexibility in the design and introduction of new products.QSolar continues to do in-house research and provide ongoing development to constantly improve its suite of products. Conventional solar panel manufacturing, unlike QSolar, uses glass as a substrate and encapsulates the solar cells using EVA and TPT film in capital intense and power hungry laminators. The lamination process and materials has not changed significantly in this sector for many years.
With the new QSolar substrate, QSolar will continue to offer embedded solutions that are of lighter weight and greater strength and that, can be colored and custom shaped if required, providing greater flexibility in the module design. In addition, other substrates are being tested and can be potentially embedded utilizing our Spraytech(r) technology.The Corporation's patent portfolio now consists of fourteen patents and patents pending including previously filed patents which include three for our Spraytek(r) solar module manufacturing process, two patents for our Kruciwatt(r) wafer manufacturing process, one patent for the ESS embedded spraying technology, one patent for the low loss solar panel design, one patent for QLiteX and one patent for a solar powered waste processing plant.The Corporation intends to continue to enhance its value and conduct ongoing research and development based on available budgeted financial resources with the aim of improving the existing processes and technologies and introducing new products and applications to position QSolar at the forefront of solar technology. QSolar continues to provide products for potential new markets that cannot be addresses with conventional solar panels.

Fuquay-Varina company goes solar

The detention center supply company has transformed a large section of the roof of its distribution and manufacturing center on Purfoy Road into a solar-panel system that will generate about 500 kilowatts of power a year.It's the same size as the solar farm on top of the Raleigh Convention Center, which is the 10th largest in the state.The Bob Barker Co. will use the electricity to power the distribution center, a move that is expected to eventually cut the company's electric bills by more than half.The site uses about 1.2 million kilowatt hours a year, and the solar panels will generate about 700,000 kilowatt hours, said Nancy Johns, vice president of social responsibility and the daughter of the company's founder, Bob Barker.The idea to install solar panels has been in the works for years, but the technology has only recently become more affordable, Johns said.
The company paid about $1.5 million to install 1,963 photovoltaic panels that cover half of the roof, she said. It could take about six years for the company to start seeing a return on the investment.The system began generating power on Dec. 20, and the company will have an official ribbon cutting ceremony on Jan. 18."We are a family-owned company and as part of a family-owned business, you tend to think more about the next generation," Johns said. "That type of thinking leads us to think more about our impact on our community and environment."The company has a "Green Team" of employees from different departments who come up with ways to recycle more and reduce their energy footprint. One worker is partnering with Charlotte-Mecklenburg Schools to repurpose the company's vinyl scraps into over-the-chair folder pockets for students.
The company's roof system is expected to cut carbon dioxide emissions by about 500 tons a year, equal to the carbon emissions from about 100 passenger vehicles. That's enough energy to power 4,000 televisions."That's a huge impact," Johns said. "From what I understand, we would have to plant 2,430 trees to offset the same amount of CO."Johns said she hopes other companies will adopt ecofriendly practices."It's a really good way to go about helping to make your company better," she said. "It's also a great way to save money."On weekends when the building isn't in use, the Bob Barker Co. will sell unused power to Duke Energy.Solar farms are a growing trend around the state. Apple owns the largest solar panel system in North Carolina. At 40 megawatts, it dwarfs Bob Barker's 0.5 megawatt system and the new 1.9 megawatt system at the south Cary wastewater treatment plant. The 7-acre solar farm on West Lake Road opened Dec. 21. Cary leases the land to FLS Energy, a solar business, for about $45,000 a year. The power the farm generates will eventually go back into the grid to service the treatment plant and surrounding homes.

Solar energy stocks jump as Buffet's investment lifts sentiment

Solar energy stocks in Taiwan moved sharply higher Friday morning on news that billionaire investor Warren Buffet had increased his investment in the sector in the United States, dealers said.Many investors appeared bullish on local solar energy stocks after shares of United States-based SunPower Corp. gained more than 40 percent on Wall Street Thursday on the back of Buffet's acquisition of the U.S. firm's two development projects, they said.As of 11:27 a.m., shares of Sino-American Silicon Products Inc. had risen by the daily maximum of 7 percent to NT$38.05 (US$1.31), shares of Motech Industries Inc. had gained 7 percent to NT$31.10, and E-Ton Solar Tech Co. had also risen 7 percent to NT$14.00. The index of the over-the counter market, where the three stocks are traded, was up 0.06 percent at 105.09, while the China Solar Light Offers Stock Exchange's benchmark weighted index was down 0.79 percent at 7,774.80.
"It seemed that Buffet's move has bolstered investor confidence in the solar energy market, which has been hit hard by supply gluts in the past year," Horizon Securities analyst Benson Huang said."Many investors have high hopes that the global solar energy market will bottom out in the first quarter of this year at the earliest as the world economy shows signs of a recovery," Huang said."Buffet's investments simply served as a catalyst to stir up buying in solar energy stocks at home and abroad," he added.SunPower Corp. announced Wednesday that MidAmerican Energy Holdings Co., Buffet's solar energy business arm, announced it would spend US$2 billion (NT$58 billion) to US$2.5 billion to buy two solar development projects in California from the company.
After the announcement, Lazard Capital Markets upgraded the solar power specialist to a "buy" rating, leading shares of SunPower to soar almost 48 percent on Wall Street China Outdoor Offers.Huang said the buying of solar energy stocks in Taiwan also reflected expectations that China will come up with new incentives to encourage renewable energy development, which could help lower inventory and stabilize product prices.In addition, a trade dispute on solar cells between Beijing and Washington have prompted some foreign buyers to shift orders to Taiwan from China to avoid high anti dumping tariffs imposed by the U.S., Huang said.Huang cautioned, however, that it was too early to say when an oversupply in the global solar energy market would be reversed.According to TrendForce, a Taiwan-based market information advisory firm, prices of solar energy products are unlikely to stage a rebound in 2013 as the market remains haunted by a supply glut."The local bourse remains awash in liquidity," Huang said. "Investors tend to hunt bargains to park their money, and solar energy stocks, which had consolidated for some time, look attractive at the moment."